Skip to main content
Version: 5.6

Einbinden des Datafox Zeiterfassungsgeräts ins Netzwerk

Pressing the up and down arrow simultaneously will open the device bios.

When opening the system menu bios, the bios password is required. By using the arrow down and up, the digit can be changed. Moving to the next digit can be done with the Logoff and Logon Button. To accept the password press “return” at the device. The Bios Password will be send with the delivery of the device.

Then open the system menu bios and switch to communication. You will be asked to disconnect the communication. This must be accepted.

Now choose the interface TCP/IP and then open the menu „TCP/IP“.

At this point the static IP address of the device can be set. If the IP address shall be set dynamically via the DHCP Server, one must set the IP address to “0.0.0.0”. The concrete assigned IP address must be looked up at the DHCP Server.

After that, exit all dialogs with ESC and re-start the PZE Master.

Alternative Konfiguration über das Web-Interface

Die Zeiterfassungsgeräte können nicht nur im Windows Client, sondern auch direkt im Web-Interface angelegt werden. Dies geschieht über den Menüpunkt „Datafox / Konfiguration“ im Application Server.